ESD/Anti-Static/Conductive/Dissipative Floors & Coatings-  These industrial epoxy and urethane coating systems are designed for sensitive electronic manufacturing plants, cleanrooms, powdered munitions, explosion proof/flammable storage areas, AGV, electronic assembly areas, and pyrotechnic processing areas,  which require antistatic/conductive/static control floors.  These systems provide high reliability, are tested and certified, and have long lasting, attractive finishes. 

Highly chemical resistant polymers are also available.

A NEW GENERATION of ESD/Conductive/AntiStatic Floors is available ! 

The electrical properties of EP Floors coating systems do not degrade from surface wear. Conductivity/Performance is retained for years and years, until the coatings are completely worn through.  This ensures that the EP Floors'  ESD coating system shall provide the greatest payback, and lowest annual cost, than any other ESD systems .  Tested and certified upon completion of every installation; an exclusive FIVE YEAR Warranty provides further peace of mind.

NO WAXING REQUIRED !

With the conductive metallic aggregate, this system never needs waxing, in order to preserve its electrical properties. 

If desired, the floor may be waxed (ESD Wax only), which help preserve and enhance it's gloss.

Re-Coatable

All systems are re-coatable at nominal cost, at the end of their service life.

TYPICAL ESD SYSTEM:

Base Layer/Primer
The base layer consists of a 100% conductive solids epoxy polymer, forming a highly conductive ground plane. This ground plane provides the foundation for the floor's electrically conductive network. This layer is composed of an extremely hard aggregate that's permanently embedded into the base layer, further increasing the floor's overall strength. Within this aggregate mixture are virtually indestructible, electrically conductive carbide bits. With 14,400 carbide bits per square foot, the core layer provides millions of paths to ground, resulting in consistent ESD protection, while eliminating the risk of nonconductive voids.

The Protective Top Layer
The protective top layer contains a conductive matrix, that's suspended within an aliphatic urethane. This conductive top layer provides a seamless, satin wear surface with superior abrasion and chemical resistance, as well as excellent cleanability and scuff resistance.

Optional:  additional BASE COAT- If the existing substrate is in poor condition (e.g.- patches, holes, adhesive/glue residue, rough concrete, etc.), than an additional base coat of epoxy shall be required, in repair these defects, prior to application of the ESD coating system.

ESD FLOOR SYSTEMS AVAILABLE

ESD 144C

Solvent-borne,Conductive epoxy primer.

ESD 324C  

Solvent-borne ESD control urethane coating.

High gloss. 

UV Stable. 

Excellent Chemical Resistance

ESD 145CP

Electrostatic-control epoxy primer.

Low odor.

High gloss.

ESD 183C

Electrostatic-control epoxy coating.

Low odor.

High gloss.

Conductive 950 ESD - Extra Heavy Duty floor Resurfacer

3/16”resurfacer. 
Suitable for AGV ‘s and Heavy Traffic Conditions. 

ESD EP1000 ESD Epoxy floor Coating - Electrostatic-control epoxy coating. Low odor. High gloss.
ESD EP3000 ESD Epoxy floor Coating - Solvent-borne ESD control epoxy coating. High gloss. 
ESD EN7000 ESD Epoxy floor  - Electrostatic-control epoxy novalac coating. 
- Excellent chemical resistance to strong acids and caustics. 

ESD 610 ESD  Floor Coating - Hi-build epoxy coating. Low odor. High gloss.
ESD UR5000 ESD  Floor Coating - Electrostatic-control aliphatic polyester polyurethane.  UV stable. -Excellent chemical resistance.

ESD Vinyl-Chip Floor
- Highly decorative, vinyl chip, electrostatic-control epoxy.
- Cost effective alternative to ESD tile.
- Seamless
- Chemical-resistant

AUXILIARY PRODUCTS
Vinyl Tile Epoxy Floor Primer
- Bonds to vinyl tile. Low odor. 100% solids as supplied.

Call us when you need a contractor that has the installation experience you can count on !

Most ESD flooring companies are simply distributors of ESD flooring materials.  

Once the materials leave their warehouse, they don't want to hear from you again.

If you are lucky, they may hire a third party contractor to get involved, creating a myriad of new "issues" & potential problems.

EP Floors provides a complete turn-key installation of static dissipative flooring, using our own materials and professional installation crews. The customer receives a solid, single source warranty covering materials and labor.  All Floors are tested and certified to meet strict ANSI/ESD S20.20-2007  requirements. 

FAST TURNAROUND AVAILABLE:  All flooring systems may be installed over weekends, holidays, or while in production, if necessary.           

ESD/Anti-Static/Conductive/Dissipative Floors & Coatings

We have a diverse customer base. From Fortune 500  industrial companies to military/government agencies; 

From sole proprietorships to hi-tech start up firms.