CONCRETE VAPOR DRIVE-ESD Epoxy Flooring | EP Floors Corp. | Nationwide, Tested/Certified/Warrantied, Anti Static,Conductive Floors

EP FLOORS CORP.	INSTALLED/TESTED/CERTIFIED/WARRANTIED
QUESTIONS? Contact Us (800) 808-7773
Excellent Durability, Low maintenance ! Boston ●Atlanta ● Washington ● Chicago ● Dallas ● Denver ● Los Angeles ● Seattle

esd flooring,anti static flooring,conductive flooring,esd floors,static dissipative flooring,esd floor, antistatic flooring,anti static floor, control flooring,anti static floor finish,esd epoxy flooring,esd floor coating

EP Floors Corp. provides a turn-key ESD Floor system.

EP Floors Corp is recognized as one the leading independent U.S. applicators of seamless, epoxy & polyurethane, ESD static control flooring. We have installed millions of square feet of seamless systems, throughout the 50 States. Utilizing reliable and trusted brands, with our own factory trained crews, you can rest assure that the system we install is tested, certified, and guaranteed with a solid, single-source 5 year warranty.

EP FLOORS ADVANTAGE CERTIFIED: ANSI/ESD S20.20-2007 DoD 4145.26M

•Maintenance/Cleaning

•ESD Certification

•Colors

QUESTIONS? Contact Us
(800) 808-7773

MOISTURE TESTING

TEST KIT INFORMATION (click here)

Concrete moisture vapor emissions are natural components of any concrete slab regardless age of grade level. Moisture vapor is the mixture of air and water which can travel in places that water in a liquid state can not. Concrete drying creates an emission from the slab regardless of whether the concrete slab is on, above, or below grade. The temperature and humidity differential between the building interior and the moisture source will cause moisture vapor to be drawn out of the slab into the building.

Moisture vapor emission from suspended concrete is often overlooked as a potential cause of floor covering failure. Mmoisture vapor emission may be the result of moisture vapor transmission from below the slab. The moisture source can be water trapped in a blotter course over a vapor retarder or moisture from the earth passing through the slab system.

Some flooring materials that are less breathable, such as epoxy based coatings, resilient flooring and carpet with waterproof backings, can make the moisture problem worse. They can act as a surface moisture retarder and trap moisture vapor between the floor covering and the concrete slab. This may cause coating failures including: delamination/peeling of the coating, blistering and bubbling. If you break apart the failing areas, you may even see visible water "squirting out".

EP FLOORS CORP installs 1/8- 1/4 inch vapor mitigation underlayments. These underlayments may be installed under all of our ESD and Conductive flooring.
These systems resist up to 12 lbs of vapor transmission (12 lbs/1000 sq ft/ 24 hrs). This is 3x the limit/threshold for conventional coating systems. These system can handle heavy traffic, are available in a variety of colors/finishes, and provide excellent return on investment. Additionally, these carry the EP Floors Exclusive Five Year Warranty.

READ MORE..